Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

Regarding USB Type-C Dual Role Port (DRP)

Status
Not open for further replies.
S

sakibnaz

Full Member level 3
Full Member level 3
Joined
Jul 6, 2008
Messages
165
Helped
6
Reputation
12
Reaction score
6
Trophy points
1,298
Activity points
2,778
Hi All.

My project have 2 x USB-C DRP (Dual Role Ports). Here the target is to charge 5V Load from a 5V Power Source all via USB-C.

I have a 8-bit MCU in design and need the Ports in DRP. I need to detect at which Port, Load if connected and which port a Power Source is connected (where Load can be a SmartPhone and Power source can be a Tablet). So based on the detection we can set the USB-C Ports to Soruce/Sink Role.

Any advice please?

Thanks ad regards.
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top