Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

Regarding thermocouple with two microcontrollers

Status
Not open for further replies.
microchaos

microchaos

Junior Member level 3
Junior Member level 3
Joined
Dec 10, 2003
Messages
27
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Location
Lithuania
Activity points
223
Regarding thermocouple

Hi All,

I have one JK thermocouple and I need to read the value with 2 controllers. Is it possible to connect one thermocouple to two measurement controllers? If not, is it possible at all? If yes, what circuitry I need to use?

Thanks in advance!
 

Re: Regarding thermocouple

Hi microchaos,

It maynot be easy to connect a thermocouple to two systems since you have to use cold junction compensation and all those stuffs. One method you can use is connect the amplified analog output of the thermocouple to the ADC input of the controllers.
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top