Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Regarding polyphase filter in ADS

Status
Not open for further replies.

ydvkaushal

Newbie level 6
Newbie level 6
Joined
Mar 6, 2008
Messages
11
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Activity points
1,345
According to the double quadrature model what will be the input to IF polyphase filter ?

Plz see the attached figure.........
need help .. its urgent !!!!!!!!:cry:
(in terms of Iin+, Qin+, In-, Qin- )?
 

Polyphase filter inputs are always quadrature components tha come from a mixer or LO signal source ( divided by 2 ) etc..
I means IN-PHASE
Q means QUADRATURE-PHASE.

First order filter has a single sided pole that is determined by

Fp=1/2*pi*R*C

Second order has two independent single sided poles etc..
Because of single sided poles, spectrum is NOT symmetrical but single sided..

There are lot of information about polyhase filters but I have no time to explain..
 

    ydvkaushal

    Points: 2
    Helpful Answer Positive Rating
ydvkaushal said:
According to the double quadrature model what will be the input to IF polyphase filter ?

Plz see the attached figure.........
need help .. its urgent !!!!!!!!:cry:
(in terms of Iin+, Qin+, In-, Qin- )?

Polyphase filter paper
 

    ydvkaushal

    Points: 2
    Helpful Answer Positive Rating
Status
Not open for further replies.

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top