Reflow oven from ebay - T962

Status
Not open for further replies.
D

darksir

Junior Member level 1
Joined
May 13, 2012
Messages
15
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Activity points
1,411
Hi all,
please, do you have some experience with cheap chinese reflow oven T-962 ?
I found some informations about poor quality, poor thermal power - in specifications have oven 800 W of power, but measured parameters is some about 300W etc...
This informations are everything from 2009 and earlier...

So, do you have fresh experience with this product? Is possible this product have new firmware, or better quality?

**broken link removed**

I need this for production 20-50 SMT pcb weekly and prototyping. Is DIY reflow from toaster oven better choice? I don´t have much time for this DIY project :-(

Many thanks,
Petr
 

**broken link removed** uses the T962.
They have not mentioned any problems in their web page.
It is low cost for the metalwork (enclosure) and controller, so even if you had to strip it down and reassemble, I
suspect it may be worthwhile.
However, I've not tried it (I'm planning to build my own, but the enclosure is a problem).
 

Status
Not open for further replies.

Similar threads

Menu
Log in
Register
Cookies are required to use this site. You must accept them to continue using the site. Learn more…