Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

Redundancy protocol in different networks

Status
Not open for further replies.
R

rooftile

Member level 2
Member level 2
Joined
Apr 28, 2008
Messages
45
Helped
3
Reputation
6
Reaction score
1
Trophy points
1,288
Activity points
1,559
Hi all,

I would like to rebuild a redundant system. Till now I have used the CARP (Common Address Redundancy Protocol) to provide redundancy, since the involved machines (two PCs) were in the same network segment (the same LAN). Now I would like to change the switches with new routers and, since the PCs will be in two different networks, I'm afraid that the CARP protocol will not work anymore.

Any idea?
Thanks a lot in advance.

CD
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top