Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Redhat 7 and pentium D 830, dual core 64 bit

Status
Not open for further replies.

peen1

Member level 2
Member level 2
Joined
Nov 2, 2004
Messages
47
Helped
1
Reputation
2
Reaction score
0
Trophy points
1,286
Activity points
495
Gentlemen,

I was wondering if redhat 7 (7.2) will run ok on a 64 bit dual core pentium machine. Has anyone had any problems? I think Redhat 7.2 is the best when it comes to synopsys and cadence tools.

Why do the EDA toold give problems on AMD machines?

Added after 7 minutes:


I mainly want to run synopsys core synthesis and primetime, both are 32 bit softwares, on the dual core 64 bit pentium machine
 

You might as well install it on the machine and give it a try. :)
If the machine can run Red Hat 7.2 then you can run DC and PT. But these tools will run in 32-bit mode of course.
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top