Redhat 7.3 crashes when booting!

Status
Not open for further replies.
M

mmmqqqjjj

Newbie level 2
Joined
Dec 28, 2003
Messages
2
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Activity points
34
Redhat 7.3 can't boot

I want to use Candence and Synopsys EDA tools on Linux.
I installed the Redhat 7.3 yesterday twice and encountered the same problem:
I have finished the Redhat 7.3 installation on Pentium 4 mainboard, then the Redhat 7.3 began to boot, and deaded when checking the USB device.
Who tell me how to solve it?
 

I have met the same problem before.
You can put out everything in the USB such as print machine. Then you can boot the linux.
Good Luck.
 

U can modify bootloader menu ....
and add "nousb" at the end of this line...
for example:

kernel /vmlinuz-2.4.22-1-2115.nptl ro root=/dev/hda3 nousb

when u boot system, it will ignore usb device.
 

Re: Redhat 7.3 can't boot

Thanks!
I have solved this problem, I disabled the USB2.0 controller on 845GL mainboard BIOS setup and redhat7.3 booted up.
 

pail said:
U can modify bootloader menu ....
and add "nousb" at the end of this line...
for example:

kernel /vmlinuz-2.4.22-1-2115.nptl ro root=/dev/hda3 nousb

when u boot system, it will ignore usb device.
Click to expand...
A good method! Can you tell me where the directory of the file including this line? I am a newbie in using linux.
3x
 


/etc/lilo.conf
 

check /etc/module.conf
remove USB device
 

Status
Not open for further replies.

Similar threads

Menu
Log in
Register
Cookies are required to use this site. You must accept them to continue using the site. Learn more…