Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

recommend a >575 msps ADC?

Status
Not open for further replies.

biff44

Advanced Member level 6
Advanced Member level 6
Joined
Dec 24, 2004
Messages
5,059
Helped
1,376
Reputation
2,748
Reaction score
1,060
Trophy points
1,393
Location
New England, USA
Activity points
37,988
Need a 12 bit or greater single adc clocking at 575 msps. Any recommendations?
 

Hi biff44,

AD9434-500 from Analog Devices samples at 500 MHz with 12 bits. Near, but not enough.
Why about using two ADC's with sufficient analog bandwidth, converting at half the composite sampling rate?
With the same input, they sample at interleaced times.
If sampling simultaneously, one of the inputs should be delayed 1.7 ns.
Regards

Z
 

Hi,

Please look at this new product:

**broken link removed**

ADC12Dxx00RF Direct RF-Sampling ADCs Sample Beyond 2.7 GHz at up to 3.6 GSPS
Breakthrough RF-Sampling ADCs Revolutionize Radio Architectures
National's 12-bit direct RF-sampling ADCs can directly sample input frequencies up to and beyond 2.7 GHz at up to 3.6 GSPS.
...


Regards

Z
 

Status
Not open for further replies.

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top