I HAVE A cmos JK 807A CAMERA:
number of pixel: 628(h)x582(v)<PAL>,
Resolution:380 lines.
scaning frequency:50 Hz
min.lllumination: 0.2~3 Lux
S/N ratio : 40db
white balance : Auto
video output 1.0 Vpp composite 75ohm
power supply
c 9v.
my project is "Real time video capture and image processing using fpga".
i plan for edge detection of the input video or brightness control of
the video.so as exercise i connect camera output to video_IN, monitor
connect to VGA out on DE2 board.I use the DE2_TV project (demo of Altera),
download DE2_TV.sof (bitstreams) to Cyclone in DE2.But the i did not
getting any video.when disconect the camera from TV_In,Monitor display
the blue screen.I think the verilog code I2C_AV_Config block has problems
to miss config the ADV7181B, i edit it and complie but not successful.
the DE2_TV might has some other problems for my project,but i don't know.
also tell me is it possible with that camera or not.Can You help me!!!!!