Okba_
Junior Member level 2
The following video shows an electronic circuit which can decode two types of remote controls the first one uses Philips RC5 protocol ans the second uses a protocol used in some LG televisions.
As shown on the attached circuit schematic diagram there is a push button, this button allows us to chose the protocol which we are going to decode.
The microcontroller used here is PIC16F877A runs @ 12MHz.
As shown on the attached circuit schematic diagram there is a push button, this button allows us to chose the protocol which we are going to decode.
The microcontroller used here is PIC16F877A runs @ 12MHz.
