razavi bandgap references

Status
Not open for further replies.

gilbertomaldito

Full Member level 3
Joined
Aug 21, 2006
Messages
159
Helped
4
Reputation
8
Reaction score
3
Trophy points
1,298
Activity points
2,385
can someone help me how to produce multiple vref from Razavis bandgap reference? (the most basic one bg studied).... I am having hard time producing these vrefs. but when I used the bit complicated one, i was able to produce them.

My process is 10v input, which i need to have 750mv, 4v, 5v and 7.2 v vreferences.

please guide me.

-cute
 

If you don't need low output impedance then a properly
designed resistor ladder from output to ground, with one tap
at the "magic" feedback voltage returned to the bandgap
error amplifier input, would do it. Other taps at your discretion,
perhaps buffered
 

hi d***-freeb**d,
with Razavi's Fig 11.9 Bandgap, can I do resistor ladder from output to ground? Have u done this before? or can u share your reference about this?

I tried to use Razavi's Fig 11.39, and I did the resistor ladder, and it was a success. But my professor kept on insisting me to use the Fig 11.9 Bandgap. But I just dont know if it is proper to do resistor ladder to that circuit.

Please explain, I need your inputs.
 

Status
Not open for further replies.

Similar threads

Menu
Log in
Register
Cookies are required to use this site. You must accept them to continue using the site. Learn more…