clivew
Newbie level 1
- Joined
- Nov 10, 2008
- Messages
- 1
- Helped
- 0
- Reputation
- 0
- Reaction score
- 0
- Trophy points
- 1,281
- Location
- Gloucestershire U.K
- Activity points
- 1,289
I wonder if anyone can help with this fault, presumably in the 11-1534 (19-1047) module,
as the reference oscillator is fine.
I replaced all electrolytics a few years ago and cleaned the boards also.
The machine has been unused for a year or more, and was fine when last used:sad:
"51" shows in the memory display on switch on, "80" shows in it's place when "display error code" is pressed.
I have dismantled it and can't see anything obviously wrong.
I know it's a lot to ask, but any help would be really appreciated.
Many thanks,
Clive
as the reference oscillator is fine.
I replaced all electrolytics a few years ago and cleaned the boards also.
The machine has been unused for a year or more, and was fine when last used:sad:
"51" shows in the memory display on switch on, "80" shows in it's place when "display error code" is pressed.
I have dismantled it and can't see anything obviously wrong.
I know it's a lot to ask, but any help would be really appreciated.
Many thanks,
Clive
Last edited: