quisi-elliptic waveguide filter with post discontinuity

Status
Not open for further replies.

amicloud

Full Member level 2
Joined
Oct 11, 2004
Messages
138
Helped
4
Reputation
8
Reaction score
2
Trophy points
1,298
Visit site
Activity points
1,100
If chebyeshev filter,the several half-wavelength sections are in a line.
and the resonating modes are all TE101 mode.
but as to the quasi-elliptic, it is necessary to realize cross-coupling,
so the sections cant be in a line.As described in attached figure,where * are posts.
Is it OK?
 

It's not OK! This circuit will not work. You need to use waveguide filter with half-wavelength resonators and septum slot coupling. You can find design such filters(without cross-coupling) in the "Matthaei's book".
 

If you want to get an elliptic filter,you should know how to get zeros of the transmission function,which should you to know about coupling,only diffient signs of coupling cofficients can you to get zeros needs.
 

Status
Not open for further replies.
Cookies are required to use this site. You must accept them to continue using the site. Learn more…