Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

Question on Transient Voltage Suppresor ciruitry

Status
Not open for further replies.
S

soused

Newbie level 3
Newbie level 3
Joined
Dec 19, 2006
Messages
3
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Activity points
1,300
Hi there,

May I know why transil T1 has to be bi-directional? Wouldnt it be the same if T1 was uni-directional and in the same orientation as diode D1? Please see attached datasheet here, for diagrams. Thanks in advance.
 

Hi Ian,

Thanks for your reply. What I really wanted to know was why a bi-directional TVS (transil T1 in this case) is being used for this circuit. It seems transil T1 is used only for reverse transient over-voltage protection and as such wouldn't a uni-directional TVS suffice (since transil T2 handles the forward transient over-voltages)?

Thanks.
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top