abcyin
Full Member level 4
- Joined
- Apr 15, 2005
- Messages
- 236
- Helped
- 12
- Reputation
- 24
- Reaction score
- 3
- Trophy points
- 1,298
- Activity points
- 2,855
Hi, all,
I am trying to simulate the OIP3 of the quadrature mixer, and I found that if I set the LO of the quadrature mixer to be 90 degree apart, that's quadrature LO input to the mixer, then the output OIP3 of the two mixers' output would be different, about 3dB difference, by QPSS analysis.
I am wondering why there would be such difference, because the two mixers are exactly the same.
Is there anybody encountering such problem, and how to solve this?
Thanks in advance,
abcyin
Solved, by PSS and PAC.
I am trying to simulate the OIP3 of the quadrature mixer, and I found that if I set the LO of the quadrature mixer to be 90 degree apart, that's quadrature LO input to the mixer, then the output OIP3 of the two mixers' output would be different, about 3dB difference, by QPSS analysis.
I am wondering why there would be such difference, because the two mixers are exactly the same.
Is there anybody encountering such problem, and how to solve this?
Thanks in advance,
abcyin
Solved, by PSS and PAC.
Last edited: