question on PME earthing?

Status
Not open for further replies.
D

davidkelly

Newbie level 1
Joined
May 8, 2014
Messages
1
Helped
0
Reputation
0
Reaction score
0
Trophy points
1
Activity points
7
Ok, as I understand it, if for (some silly reason) I touch the live or neutral wire I get a shock, Now with PME the earth is connected to Neutral, and Earth is also connected to all the copper pipes around the house so how come I don’t get a shock when I touch a pipe or tap?

Please keep answers simple guys, im a newbie here.
 

You NEVER get a shock from a neutral, unless there is a fault. The whole purpose of an earth is to make sure that everything except for the live is at the same voltage. So your pipes and the floor are at the same voltage so when you touch both, no voltage, no current, no shock.
Because of the current flowing through the neutral and the resistance of the cable, there is some times a small voltage on the neutral, say up to 6V.
Frank
 

Status
Not open for further replies.

Similar threads

Menu
Log in
Register
Cookies are required to use this site. You must accept them to continue using the site. Learn more…