aliyesami
Full Member level 6
- Joined
- Jan 7, 2010
- Messages
- 369
- Helped
- 0
- Reputation
- 0
- Reaction score
- 0
- Trophy points
- 1,296
- Location
- USA
- Activity points
- 4,190
I am reading datasheet for NHD-2.4-240320SF-CTXI#-FT1 display which is a 2.4inch ILI9341 controller based display and its says the following about voltage requirements
Supply Voltage for Logic IOVDD ‐ 1.65 2.8 3.3 V
Supply Current IDD VDD=2.8V ‐ 7 9 mA
“H” Level input Vih ‐ 0.8*VDD ‐ VDD V
“L” Level input Vil ‐ GND ‐ 0.2*VDD V
“H” Level output Voh ‐ 0.8*VDD ‐ VDD V
“L” Level output Vol ‐ GND ‐ 0.2*VDD V
i can put a 3.3 v regulator on the supply volage but what do i do with the WR, D/C, RD and RES signals that are coming from the MCU ? since the data sheet is requiring High input as 0.8 xVDD .
thanks
Supply Voltage for Logic IOVDD ‐ 1.65 2.8 3.3 V
Supply Current IDD VDD=2.8V ‐ 7 9 mA
“H” Level input Vih ‐ 0.8*VDD ‐ VDD V
“L” Level input Vil ‐ GND ‐ 0.2*VDD V
“H” Level output Voh ‐ 0.8*VDD ‐ VDD V
“L” Level output Vol ‐ GND ‐ 0.2*VDD V
i can put a 3.3 v regulator on the supply volage but what do i do with the WR, D/C, RD and RES signals that are coming from the MCU ? since the data sheet is requiring High input as 0.8 xVDD .
thanks