Spaceman4
Newbie level 1
- Joined
- Jan 27, 2013
- Messages
- 1
- Helped
- 0
- Reputation
- 0
- Reaction score
- 0
- Trophy points
- 1,281
- Activity points
- 1,287
Hi All, I am new around here.
I using frost beam former matlab code as part of phased tool box.
I have conducted an experiment with microphone array of 8, spacing of 3cm with noise [4.4-4.6KHz] and signal [5-5.2KHz].
The steering direction is 0 degrees [exactly were the signal is located].
The noise is 90 degrees to the array.
Due to the fact that the noise and signal have no overlap spectrum, should I suppose to get "infinite" SNR ?
Thanks,
Tamir
I using frost beam former matlab code as part of phased tool box.
I have conducted an experiment with microphone array of 8, spacing of 3cm with noise [4.4-4.6KHz] and signal [5-5.2KHz].
The steering direction is 0 degrees [exactly were the signal is located].
The noise is 90 degrees to the array.
Due to the fact that the noise and signal have no overlap spectrum, should I suppose to get "infinite" SNR ?
Thanks,
Tamir