Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

Question about frequency divider

Status
Not open for further replies.
A

Alles Gute

Full Member level 2
Full Member level 2
Joined
Dec 4, 2003
Messages
135
Helped
15
Reputation
30
Reaction score
10
Trophy points
1,298
Activity points
1,217
My question is shown in the figure. After a divide-by-2 frequency divider, clk_1 will turned to be clk_1' which has half frequency of clk_1. clk_1 and clk_1' have the same waveform.
Now, if clk_2 is input to the same divide-by-2 frequency divider, what will be the output clk_2'? What will be the waveform of clk_2'?
 

Alles Gute,

The output will be 2 pulses as in clk_1', followed by a 4 clk_1 pulse "gap". The process then repeats.

Regards,
Kral
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top