Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

Question: 6-layer pcb manufacturing steps

Status
Not open for further replies.
E

edaenrico

Member level 4
Member level 4
Joined
Apr 19, 2010
Messages
76
Helped
10
Reputation
20
Reaction score
10
Trophy points
1,288
Activity points
1,864
Hi,

I have a PCB which is made of: 1 core and 2 pre-pregs.

Does anybody know the steps for manufacturing this 6-layer PCB?


Thanks,
Enrico Migliore
 

A standard 6-layer stack is using 2 cores. Single core would be used in a sequential process for buried vias.

Manufacturing steps for standard 6-layer are

- etch both (double side) core substrates
- assemble, press and cure complete stack (copper foil - prepreg - core - prepreg -core - prepreg -copper foil)
- drill
- through-plate
- etch outer layers
 
Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top