artic
Newbie level 1
- Joined
- Feb 18, 2014
- Messages
- 1
- Helped
- 0
- Reputation
- 0
- Reaction score
- 0
- Trophy points
- 1
- Activity points
- 6
Hi
I would like to control manually the trasmitted power from Quectel M95.
For my understanding, Quectel M95 automatically choose the emitted power on the basis of the signal received from the base station.
Is there an AT Command which allow to set the TX power manually?
Thanks a lot your help!!!
I would like to control manually the trasmitted power from Quectel M95.
For my understanding, Quectel M95 automatically choose the emitted power on the basis of the signal received from the base station.
Is there an AT Command which allow to set the TX power manually?
Thanks a lot your help!!!