Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

quadrifilar helix antenna feeding?

Status
Not open for further replies.

winglj

Full Member level 4
Full Member level 4
Joined
Feb 21, 2005
Messages
195
Helped
2
Reputation
4
Reaction score
2
Trophy points
1,298
Activity points
3,063
Hi, everyone. I have a question about the quadrifilar helix antenna feeding design. Actually, it requires 4 different output with 0, 90, 180, 270 degree phase difference. Most of the literatures requires a 180 balun with 2-90 degree quadrature hybrid.

I am wondering whether there are any commercial chip or coupler for this type of applications, or any other good design topology which requires simpler feeding structure?

Thanks in advances.
 

There are a numbeer of modes possible and useful for different siutuations. Look up reference material by Kilgus and see if you can run down a book by Corzine and Mosko on the subject. Both should be helpful. (....and no I do not have an e-book version)
 


    winglj

    Points: 2
    Helpful Answer Positive Rating
Status
Not open for further replies.

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top