Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

Q factor of Inductor for 180 nm technology

Status
Not open for further replies.
R

RajHimu

Newbie level 1
Newbie level 1
Joined
Jan 23, 2017
Messages
1
Helped
0
Reputation
0
Reaction score
0
Trophy points
1
Activity points
6
Hello,

Designing an Common source LNA, this requires an inductor to connect, How to calculate the Q factor for 180(or Below) nm NMOS technology

With regards,
Raj
 

Hi Raj,

You can read about it here.
The Quality factor is given as \[ Q = \frac{X__L }{R } = \frac{2\pi ~f L}{R}\].




RajHimu said:
Hello,

Designing an Common source LNA, this requires an inductor to connect, How to calculate the Q factor for 180(or Below) nm NMOS technology

With regards,
Raj
Click to expand...
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top