Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

PWM Deadtime Calculation

Status
Not open for further replies.
M

Max.Otto11

Newbie level 6
Newbie level 6
Joined
Oct 13, 2014
Messages
13
Helped
0
Reputation
0
Reaction score
0
Trophy points
1
Activity points
180
Hii all,
i have Input Freq. 0,5v to 3,25v Output PWM have 2-256 cycles Clock freq. 24MHz.
I want to give
if Input = 0,5v then Deadtime = 2
& if Input = 0,5v then Deadtime = 24.
Is there any equation to do this?

Regards
Max
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top