pakkiboy
Member level 1
- Joined
- Aug 4, 2013
- Messages
- 32
- Helped
- 0
- Reputation
- 0
- Reaction score
- 0
- Trophy points
- 6
- Location
- Jeddah, Saudi Arabia, Saudi Arabia
- Activity points
- 222
Dear members , I have designed push pull converter using SG3525 for pure sine wave inverter ( this is first step for it ) with specs
Input Voltage = 12 V DC
Output voltage = 300 V DC
transformer = ferrite core
Mosfets = IRFZ44N
( i didnt used any inductor at output after rectification , just used capacitor for filtration purpose )
Mine main problem that it work well under No load condition , but when i connect it to any load , a very sharp voltage drop occurs ( form 300 DC to even less then 100 V DC ) as i have used already built in feedback in sg3525 . Can you plz help me . I shall b very thankful to u all
Circuit Diagram
https://obrazki.elektroda.pl/3757925700_1379687360.png
Input Voltage = 12 V DC
Output voltage = 300 V DC
transformer = ferrite core
Mosfets = IRFZ44N
( i didnt used any inductor at output after rectification , just used capacitor for filtration purpose )
Mine main problem that it work well under No load condition , but when i connect it to any load , a very sharp voltage drop occurs ( form 300 DC to even less then 100 V DC ) as i have used already built in feedback in sg3525 . Can you plz help me . I shall b very thankful to u all
Circuit Diagram
https://obrazki.elektroda.pl/3757925700_1379687360.png