Psrr simulation operational amplifier !

Status
Not open for further replies.
B

biolycans

Member level 2
Joined
Aug 24, 2013
Messages
50
Helped
0
Reputation
0
Reaction score
0
Trophy points
6
Visit site
Activity points
478
Hi,

I designed an operational amplifier CMOS two stage. I want to simulate the PSRR. Vdd = 2.5 V and Vss = -2.5 V, are the voltages supply of the opamp.

What configuration and values in the input should I choose for the simulation of the PSRR ?

Regards,

Joaquin
 

Dominik Przyborowski said:
You need to do a simple ac simulation with power supply ac=1 and look on the output of closed loop opamp.
Click to expand...

Hi, thank you for your response. I did this:

1) the inverting input is connected to the output.
2) the not inverting input is connected to a offset to balance the opamp. Then I put an AC 1 in serie with Vdd.

the plot has an amplitude of -80 dB and then increase. Is this correct ?

Regards,

JC
 

Status
Not open for further replies.

Similar threads

Menu
Log in
Register
Cookies are required to use this site. You must accept them to continue using the site. Learn more…