amitaiwe
Member level 3
Hi all,
I'm trying to simulate a circuit which consists an transistor.
after running the simulation I see that the the transistor doesn't exist
in the netlist and therefor I get the error of:
" Node N16280 is floating"
I tried adding various 10meg resistor's which didn't change anything.
I tried using other versions of the transistor with no success.
Other simulations I tried work fine. I can't manage to upload the files of the project so
I'm attaching the *.out file and a capture of the circuit.
What can the problem be?
Thanks,
Amitai
I'm trying to simulate a circuit which consists an transistor.
after running the simulation I see that the the transistor doesn't exist
in the netlist and therefor I get the error of:
" Node N16280 is floating"
I tried adding various 10meg resistor's which didn't change anything.
I tried using other versions of the transistor with no success.
Other simulations I tried work fine. I can't manage to upload the files of the project so
I'm attaching the *.out file and a capture of the circuit.
What can the problem be?
Thanks,
Amitai
Code:
**** 09/29/14 13:16:23 ****** PSpice Lite (October 2012) ****** ID# 10813 ****
** Profile: "SCHEMATIC1-sim_LC1" [ C:\Users\amitaiw\Dropbox\work\schematics and simulations\SPICE\other LC circuits\lc1-pspicefiles
**** CIRCUIT DESCRIPTION
******************************************************************************
** Creating circuit file "sim_LC1.cir"
** WARNING: THIS AUTOMATICALLY GENERATED FILE MAY BE OVERWRITTEN BY SUBSEQUENT SIMULATIONS
*Libraries:
* Profile Libraries :
* Local Libraries :
* From [PSPICE NETLIST] section of C:\Users\amitaiw\AppData\Roaming\SPB_16.6\cdssetup\OrCAD_PSpice/16.6.0/PSpice.ini file:
.lib "nomd.lib"
*Analysis directives:
.TRAN 0 0.2 0
.OPTIONS ADVCONV
.PROBE64 V(alias(*)) I(alias(*)) W(alias(*)) D(alias(*)) NOISE(alias(*))
.INC "..\SCHEMATIC1.net"
**** INCLUDING SCHEMATIC1.net ****
* source LC1
R_R1 N14411 VCC 15k TC=0,0
R_R3 0 N14411 5k TC=0,0
R_R4 0 N16286 68 TC=0,0
L_L1 N16165 VCC 3.3u
V_V1 VCC 0 9Vdc
C_C3 0 N14411 1uF TC=0,0
C_C4 N16280 VCC 33n TC=0,0
C_C5 N16165 N16280 10n TC=0,0
C_C6 N16286 N16280 47n TC=0,0
**** RESUMING sim_LC1.cir ****
.END
ERROR(ORPSIM-15142): Node N16280 is floating