quickasdasd
Newbie level 1
pspice schematics
Hi everyone,
Im working on a home assigment and Im having a strange behaviour.
Im using Pspice 9.1 Schematics to simulate a simple fullwave rectifier.
Using 4 ideal diode (D1N914 with changed model value to N=e-4, Bv=1000,Rs=e-6) a VSIN(Vm=311V f=50Hz) and a inductance plus resistor(200) I output the resistance voltage.
Expected mean value sould be 2*Vm/pi=198V (no matter the load) but the solution converge to something like 189: a friend of mine have orcad capture and his value is correct but I cant fix it in every pspice schematics I tried.
Next putting putting a value for the inductance of 15H pspice schematics complains about not convergin when using caputer is ok.
Im not a pro user of pspice but Ive use it several time, still I cant understand where I am doing it wrong: If you have any ideas please tell me...IM DESPARATE!
Best regards,
PS_I attach the project file, just in case...
Hi everyone,
Im working on a home assigment and Im having a strange behaviour.
Im using Pspice 9.1 Schematics to simulate a simple fullwave rectifier.
Using 4 ideal diode (D1N914 with changed model value to N=e-4, Bv=1000,Rs=e-6) a VSIN(Vm=311V f=50Hz) and a inductance plus resistor(200) I output the resistance voltage.
Expected mean value sould be 2*Vm/pi=198V (no matter the load) but the solution converge to something like 189: a friend of mine have orcad capture and his value is correct but I cant fix it in every pspice schematics I tried.
Next putting putting a value for the inductance of 15H pspice schematics complains about not convergin when using caputer is ok.
Im not a pro user of pspice but Ive use it several time, still I cant understand where I am doing it wrong: If you have any ideas please tell me...IM DESPARATE!
Best regards,
PS_I attach the project file, just in case...