Project Paper/Thesis About PCB

Hi,
may I know if anyone has information of project papers/thesis related to PCB (design, quality, etc)
The purpose is that I would like to prepare my Master project paper related to this, by reviewing the
current issues. I am a Malaysian, and not many project/thesis related PCB is done here,
but there are many MNC giant such as Intel, Sony, etc.
Would appreciate if can get specific website for project papers/thesis related to PCB.
I have limited resources (state-of-art PCB softwares, machines, equipments, etc.)
I'll see what I can do.
Thanks!

IPC - the definitive site for all things PCB, all manufacturers of PCBs' work to their specifications. They have standards and guides covering ALL aspects of PCB design, manufacture and assembly.
**broken link removed**

Some generic and random PCB links:
**broken link removed**
**broken link removed**
Star Grounding Wars
**broken link removed**
**broken link removed**
**broken link removed**
PCB007 Do Not Perforate Planes Unnecessarily
**broken link removed**
**broken link removed**
**broken link removed**
**broken link removed**
**broken link removed**
http://www.electrical-integrity.com/Paper_download_files/EPEP98_DET.pdf
Ground Pours: To Pour or Not to Pour?
**broken link removed**
**broken link removed**
**broken link removed**
MIL-STD-461: Requirements for the Control of Electromagnetic Interference Characteristics of Subsystems and Equipment - Advanced Test Equipment Rentals
http://www.sigrity.com/papers/Power Integrity Analysis December 2009.pdf
**broken link removed**


**broken link removed**
http://focus.ti.com/lit/an/slyt026/slyt026.pdf
http://focus.tij.co.jp/jp/lit/an/slyt319/slyt319.pdf
**broken link removed**

**broken link removed**
**broken link removed**
Magnetism: quantities, units and relationships


http://focus.ti.com/lit/ml/slyp167/slyp167.pdf
**broken link removed**
Printed Circuit Design & Fab Magazine Online

EMC Testing

First Link Requires Login
EMC Information Centre

http://www.compliance-club.com/pdf/EMCTestingPart1.pdf
http://www.compliance-club.com/pdf/EMCTestingPart2.pdf
http://www.compliance-club.com/pdf/EMCTestingPart3.pdf
http://www.compliance-club.com/pdf/EMCTestingPart4.pdf
http://www.compliance-club.com/pdf/EMCTestingPart5.pdf
http://www.compliance-club.com/pdf/EMCTestingPart6.pdf
http://www.compliance-club.com/pdf/EMCTestingPart7.pdf
EMC Design
Design Techniques for EMC
Design Techniques for EMC: cables and connectors
EMC Compliance Club – Design Techniques for EMC. Part 3 — Filtering and Suppressing Transients.
Design Techniques for EMC - part 4
PCB DESIGN TECHNIQUES FOR LOWEST-COST EMC COMPLIANCE
Design for EMC Part 6: ESD, dips and dropouts, etc.


EMC Compliance Club – Design Techniques for EMC Part 0 Introduction & Part 1 - Circuit Design and Choice of Components (SECOND PART)
EMC Compliance Club – Design Techniques for EMC Part 2 — Cables and Connectors (first half of part 2)
EMC Compliance Club – Advanced PCB Design and Layout for EMC Part 6 - Transmission Lines - 3rd Part



EMC Compliance Club

Ground Loop
Ground loop problems and how to get rid of them

MISC
**broken link removed**
http://www.ucamco.com/public/RS-274X_Extended_Gerber_Format_Specification_201012.pdf
**broken link removed**
http://pcbtalk.com/data/upload/Designing_Balanced_PCBs.pdf
**broken link removed**
http://www.alternatezone.com/electronics/files/PCBDesignTutorialRevA.pdf
**broken link removed**
http://www.ece.unh.edu/courses/ece7...onent Zero Orientations for CAD Libraries.pdf
http://www.smtnet.com/library/files/upload/The-Universal-PCB-Design-Grid-System.pdf
**broken link removed**
**broken link removed**
http://www.analog.com/static/imported-files/tutorials/MT-008.pdf
Right the First Time

RF
YO3DAC\Home Page
**broken link removed**

He He
**broken link removed**
Printed Circuit Design & Fab Magazine Online

Return currents#2
http://www.oocities.org/timfoo6143/Path_of_least_L_Singapore.pdf
**broken link removed**
Trace Inductance

Thanks Marche

I am interested to make a project paper about the comparison of PCB layout design software as below:

Zuken CR5000
Mentor Graphics PADS/Expedition
Altium
Cadence Orcad/Allegro

May I know how can I get the user guide/operation manuals for the softwares above?

And is there anyone doing the comparison?

Thanks!
Ng

Aah.... a typical work of an Application Engineer

Alright, official user guide / manual may not be available for these tools on the web. You can try getting them from respective tool users. But that will not help you to do a patrametric analysis of these tools because these manuals are intended to teach the user how to use a tool.

Typical comparison of PCB CAD tools is to be done based on the performance charecterestics of their auto routers. Ideally you should route a same PCB in all these tools and then mesure the number of passes, percentage of completion, quality of routing, number if vias / layer jumps, average net length, clean-up quality, adherence to constraints, etc., And in addition, ease of creating the board file, component library, importing and exporting the standard formats (DXF, IDF, Gerber etc)

I have myself compared between Zuken CADSTAR, PADS 2005, Expedition and Allegro, but more as a user of these tools and not from academic interest. There are lot many moe ways of testing these tools. And believe me if go as per user manuals, all tools will be state of the art

Hope this helps

i really wonder ,a project paper can be like this?
who is going to be benefited with this?

I have used Cadstar/Orcad/allegro/Pads but preparing such a document is only possible if you have used latest version of all the tools.

thanks CKS,
Hi abhi, for your info,
this project can help management to decide which software is the best to purchase to suit their intention.
cost, time, efficiency, quality, problem, risk, etc.
I had been the user for CR5000 for long time, we can test a PCB design in many ways as stated by CKS,
eg routing speed, processing time for DRC, intelligence, user friendly, etc.
I know some people had did project paper about mechanical CAD software comparison,
so it is not an issue here
the only problem is the P&C of user guide, I dont mind if can get older 1 version back.

---------- Post added at 15:27 ---------- Previous post was at 15:26 ----------

thanks CKS,
Hi abhi, for your info,
this project can help management to decide which software is the best to purchase to suit their intention.
cost, time, efficiency, quality, problem, risk, etc.
I had been the user for CR5000 for long time, we can test a PCB design in many ways as stated by CKS,
eg routing speed, processing time for DRC, intelligence, user friendly, etc.
I know some people had did project paper about mechanical CAD software comparison,
so it is not an issue here
the only problem is the P&C of user guide, I dont mind if can get older 1 version back.

i can suggest you to start making one excels sheet showing feature Vs tool and share in this forum.

so we can add some comments as well as any special feature.

NO, this is not allowed by the forum rules:
I have designed complex PCB's onall of the top 3 pakages (Zuken, Mentor, Cadence) so ALL packages can do the job. These comparisons are meaningless and a waste of space as everyone has their favorite package, What is more important is having someone who is competant at PCB design and willing to learn the chosen package, understand the importance of library creation and learn about the intricies of PCB design.
As to choosing a package the only way you can decide is try them yourself.
Further how do you equate features to cost etc etc how do you define userbility...