bkelly
Member level 1
What device do you suggest for programming and debugging my evaluation board.
The board name is Open103Z. The processor is ARM, STM32F103ZET6. The board has a 20 pin connector labeled JTAG/SWD and a USB-OTG connector on the board, plus about a dozen plug on modules.
The development computer is Windows 7, 64 bit. The environment is Keil uVision 4. The RTOS will be uC/OS-iii.
I would like to hear about your experience and recomendations before making a purchase.
Thank you.
The board name is Open103Z. The processor is ARM, STM32F103ZET6. The board has a 20 pin connector labeled JTAG/SWD and a USB-OTG connector on the board, plus about a dozen plug on modules.
The development computer is Windows 7, 64 bit. The environment is Keil uVision 4. The RTOS will be uC/OS-iii.
I would like to hear about your experience and recomendations before making a purchase.
Thank you.