Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

programming / debug device selection

Status
Not open for further replies.
B

bkelly

Member level 1
Member level 1
Joined
Oct 2, 2011
Messages
38
Helped
2
Reputation
4
Reaction score
2
Trophy points
1,288
Location
USA
Activity points
1,639
What device do you suggest for programming and debugging my evaluation board.

The board name is Open103Z. The processor is ARM, STM32F103ZET6. The board has a 20 pin connector labeled JTAG/SWD and a USB-OTG connector on the board, plus about a dozen plug on modules.

The development computer is Windows 7, 64 bit. The environment is Keil uVision 4. The RTOS will be uC/OS-iii.

I would like to hear about your experience and recomendations before making a purchase.

Thank you.
 

Hello seadolphine2000,
Both links lead to the same device. The one at STMicroelectronics said it could not purchased. The digikey price was good so I ordered it, but its on back order. I will see what happens.
Thank you,
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top