Programming an AT89S8252

[AlbertNickloson]

Can an USBasp combined with AvrDude be used to program an AT89S8252? (Vcc, Gnd, MOSI, MISO, SCK and RST)
Attempting to write a part in the conf file for an 8252 using an 8253 as reference (https://www.edaboard.com/threads/avrdude-and-at89s8253-conf-file.76766/)

 

[KlausST]

Hi,

I expect this information in the avrdude help.

Klaus

 

[danadakk]

Programming AT89S52 Using USBasp ISP Programmer

Programming AT89S52 Using USBasp ISP Programmer: Easiest method for adding AT89S series in AVR DUDESS application.

www.instructables.com

Regards, Dana.

 

[Thinhx2]

I think if your Usbasp clone come from chinese, it can be program at89s8252.
I has 2 usbasp clone from china with custom version support 8051 instead original old version of usbasp or progisp usb hid. It work fine with 89s51,52 of me

 

[AlbertNickloson]

Update:
A USBasp can be used with a modified .conf file, the chips I was trying to check were read protected so I was not getting the correct responses from AvrDude.