Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

Programming 132x65 LCD with 8080 parallel interface with ST7565V driver

Status
Not open for further replies.
M

mariuszoll

Member level 5
Member level 5
Joined
Aug 28, 2012
Messages
82
Helped
1
Reputation
2
Reaction score
0
Trophy points
1,286
Activity points
2,147
Hi,

Since now, I have worked only with 16x2 LCDs, and now I have to implement a graphic application with a 132x65 LCD, that has the driver ST7565V from Sitronix. I read on forums that for those applications are recommended PIC24, or PIC32, but what I have is PIC18F4550, and PIC18F24J11.
Could you help me please with an example of schematic, and of software?

Thank you in advance.
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top