eraste
Advanced Member level 4
- Joined
- Nov 12, 2012
- Messages
- 103
- Helped
- 31
- Reputation
- 58
- Reaction score
- 29
- Trophy points
- 1,308
- Location
- France
- Activity points
- 1,938
Hi,
FTDI component like FT232RQ or FT232RL convert asynchronous signal (AS) to USB protocol.
AS need number of data bits, parity bit, stop bit and speed (baud/s).
If i have a flow of bits but not necessary in asynchronous format, may i use (by programmation) a FT232R to catch this flow and to translate it to USB protocol ?
I know that FT232R can be use up to 3MHz. My signal is at 2 MHz (one time bit is 0.5 µs).
May i program the FT232R without stop bit ?
Thank's for your answers...
eraste.
FTDI component like FT232RQ or FT232RL convert asynchronous signal (AS) to USB protocol.
AS need number of data bits, parity bit, stop bit and speed (baud/s).
If i have a flow of bits but not necessary in asynchronous format, may i use (by programmation) a FT232R to catch this flow and to translate it to USB protocol ?
I know that FT232R can be use up to 3MHz. My signal is at 2 MHz (one time bit is 0.5 µs).
May i program the FT232R without stop bit ?
Thank's for your answers...
eraste.