[SOLVED] Program for PWM of Resonant DC DC buck converter

Status
Not open for further replies.
S

shomikc

Member level 4
Joined
Apr 19, 2013
Messages
71
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,286
Activity points
1,953
Hello all,

Can anyone please help me find a program to generate PWM for a ZVS resonant buck converter? The switching frequency I am looking for is 100 kHz. Which PIC controller should I select.

Thanks and Regards,
Shomik
 

Most of resonant converters are frequency modulated (controlled) not by PWM.
ZVS is a mode of switching that depend of load, frequency and converter switch capacity (Coss), can't be controlled by a PWM.
From resonant converters, most used seem to be LLC; depending of your application may be or not most suited.
 

It depends on what you call a resonant converter.

Generally I agree that most topologies that are properly resonant are frequency regulated. However you'll see the buzzword 'resonant' applied pretty widely and often to any topology that can soft-switch. And there are many topologies that can soft switch (for at least some conditions) that are fixed frequency and/or PWM controlled.


shomikc there is a lot more information you'd need to give to get useful help. What specific topology, isolated or non-isolated, input/output voltages and power.
 
Status
Not open for further replies.

Similar threads

Menu
Log in
Register
Cookies are required to use this site. You must accept them to continue using the site. Learn more…