Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

Problem with TEA5767 Project receiver

Status
Not open for further replies.
E

Electrojosh86

Member level 3
Member level 3
Joined
Jun 20, 2013
Messages
67
Helped
0
Reputation
0
Reaction score
0
Trophy points
6
Activity points
570
https://www.edaboard.com/threads/289529/#post1266888

I came across this circuit and seeing as I had a free TEA5767 I thought I'd give it a try. For the most part it does work but there are minor problems. The schematic does not label the buttons so I have no idea really as to what they do without just randomly pushing them. Also, when the circuit goes into "auto" tuning I cannot get it to stop until it stops on a frequency. Also, I have no idea how to manually tune this thing. How do I?.. And last but not least, and this might be on my end, but sometimes the PIC just resets. Could there be a problem here?

Thanks in advance.
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top