blue_phoenix
Junior Member level 1
I am having trouble with my RabbitCore RCM2200. I am Using Dynamic C 7.20TSE program.
I have tried the sample programs, and the ones without the Ether function are OK.
The problem is that, I can't set the IP address for the Rabbit. I used the sample programs given by Dynamic C and changed the "MY_IP_ADDRESS" and "MY_NETMASK" as stated in the document. I cannot PING the IP address set in the Rabbit. I have used the Direct connection using a cross-over cable and LAN connection with straight-through but either does not work. Please help me with my problem.
Thanks in advance
I have tried the sample programs, and the ones without the Ether function are OK.
The problem is that, I can't set the IP address for the Rabbit. I used the sample programs given by Dynamic C and changed the "MY_IP_ADDRESS" and "MY_NETMASK" as stated in the document. I cannot PING the IP address set in the Rabbit. I have used the Direct connection using a cross-over cable and LAN connection with straight-through but either does not work. Please help me with my problem.
Thanks in advance