problem with Switch case statement in ccs c

hello very body I am reading a frequency of a square wave and took decisions accordingly,but my coding are not operating can you plz help me to solve the issue;solution is appreciable:
see some of my codes below:

function with switch case:
float kagabo(void)
{
switch(period)
{

case 100: period=160;
printf(lcd_putc,"\150%%");
delay_ms(2000);
break;
case 13rintf(lcd_putc,"\f16%%");
delay_ms(2000);
break;

case 14rintf(lcd_putc,"\f15%%");
delay_ms(2000);
break;


case 15rintf(lcd_putc,"\f14%%");
delay_ms(2000);
break;


case 16: printf(lcd_putc,"\f13%%");
break;

case 17: printf(lcd_putc,"\f12%%");
delay_ms(2000);
break;


case 18: printf(lcd_putc,"\f19%%");
delay_ms(2000);
break;

case 19: period=10;
printf(lcd_putc,"\f200%%");
delay_ms(2000);
break;
}
}

CCP1 stups:
setup_ccp1(CCP_CAPTURE_RE|CCP_CAPTURE_DIV_16); // Configure CCP1 to capture rise
setup_timer_1(T1_INTERNAL|T1_DIV_BY_8); // Start timer 1
enable_interrupts(INT_CCP1); // Setup interrupt on risining edge
enable_interrupts(GLOBAL);
output_low(PIN_B4);

Switch button which has to be activated for reading values in kagabo function from switch case statement:
if(input(PIN_C4)==0)
{

//kagaba();
tempdisplay();
kagabo();
if (input(PIN_C4)==0)//&&(period<100))
{
delay_ms(100);
printf(lcd_putc,"\f%3.0f",voltsf);
delay_ms(1200);

printf(lcd_putc "\12%%");

delay_ms(1000);
}
}

I can't help with CCS directly but where is your interrupt routine and do you really need all those delays? Delays used in code measuring an input period can cause the edges to be missed.

Brian.

betwixt said:

I can't help with CCS directly but where is your interrupt routine and do you really need all those delays? Delays used in code measuring an input period can cause the edges to be missed.

Brian.

Click to expand...

hello my interrupts codes are here:

#int_ccp1
void isr()
{
if (flag==0)
{
rise1 = CCP_1;
flag=1;
}
else if (flag==1)
{
rise2 = CCP_1;
period=(rise2-rise1);
flag=0;
}
}
How can I proceed with all thoses delays??How may I reduce them?


after the above;do you have any idea of how I can proceed for measuring sinusoidal wave?

I'm not familiar with CCS but shouldn't there be a line in the ISR to clear the interrupt bit?

The real issues with the delays is what are they there for anyway? You seem to have long delays all over your program that don't do anything.

There are varius ways of measuring sine waves, I presume you mean their frequency and not amplitude. The easiest is simply to feed the sine wave to a comparator to turn it into a square wave then measure it in the way you are at the moment. You can also do it by sampling with an ADC but the math gets much more complicated.

Brian.