Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

Problem with SCR conductivity (schematics attached)

Status
Not open for further replies.
R

rameshdanas

Junior Member level 2
Junior Member level 2
Joined
Jun 4, 2007
Messages
20
Helped
16
Reputation
32
Reaction score
13
Trophy points
1,283
Activity points
1,391
SCR conductivity

Even when there is no trigger pulse
given to gate terminal of SCR there is
about 52 VAC appearing across the load
point can anyone tell the reason for it

i have attached the schematic

thanks
Ramesh
 

Re: SCR conductivity

Hi,
Do not keep the gates opened, connect them to respective source through some resistor and check again., else gate leakage current may get multiplied.
Regards,
Laktronics
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top