Problem with reading eZ430-RF2500 module

[mobile-it]

ez430-rf2500

Hi All,

I am trying to set up an mspgcc environment for programming my eZ430-RF2500 module from TI.

I have some problems so I downloaded MSPFET and try to read the content with this tool but this tool always says:
21:55:54 Initialize...
21:55:55 Device: MSP430F2274. Info(0x1000-0x10FF), Main0x8000-0xFFFF)
21:55:55 Reading device memory..
21:55:57 Read failed. Synchronization error.

anybody can give me some help?

MSPFET website: **broken link removed**


Microsoft Windows XP [versie 5.1.2600]
(C) Copyright 1985-2001 Microsoft Corp.

C:\Documents and Settings\El Torro>MSP430-jtag
MSP430 JTAG programmer Version: 2.3
Use -h for help
Cleaning up after error...
Reset and release device...

An error occoured:
Can't open interface: Could not find device (or device not supported)

Using gdbproxy gives me the following:

msp430-gdbproxy --port=2000 msp430

Remote proxy for GDB, v0.7.1, Copyright (C) 1999 Quality Quorum Inc.
MSP430 adaption Copyright (C) 2002 Chris Liechti and Steve Underwood

GDBproxy comes with ABSOLUTELY NO WARRANTY; for details
use `--warranty' option. This is Open Source software. You are
welcome to redistribute it under certain conditions. Use the
'--copying' option for details.

debug: MSP430_Initialize()
debug: MSP430_Configure()
debug: MSP430_VCC(3000)
debug: MSP430_Identify()
error: msp430: Could not find device (or device not supported) (4)
debug: MSP430_VCC(0)
debug: MSP430_VCC(3000)
debug: MSP430_Reset(ALL_RESETS)
debug: MSP430_Close()
Assertion failed: !msp430_status.is_open, file target_msp430.c, line 745

This application has requested the Runtime to terminate it in an unusual way.
Please contact the application's support team for more information.




Thanks in advance.

 

[rajeshkumar123]

ez430 code examples

hi,

Are u using ur custom board or the board given with the tool

 

[mobile-it]

ez430 rf2500 project

I am using their small board eZ430-RF2500 that I get from the TI MSP430 day

 

[rajeshkumar123]

mspgcc ez430

hi,

I got this same error when i inserted the board in the opposite way. So i suspect that u have connected the small board to usb fet in the reverse way

 

[mobile-it]

code composer ez430-rf2500

I have the device in the right way plugged in.

 

[hcet]

ez430-rf2500 led

@ mobile-it

I'm going to attend TI MSP430 day on 30th tis month. If you want I'll ask the guys there. Just let me know.

ep20k

 

[mobile-it]

ez430-rf2500 code composer

Please ask them for me


thank you very much!

 

[mobile-it]

programming the ez430-rf2500

ok I have got it up and running
can anyone give me an example (C program) that blinks the red and green led on the eZ430-RF2500 as a startpoint for me to learn?

thanks very much!

 

[SmartBomb1979]

mspfet synchronization error

Doesn't the EZ430-RF2500 kit come with compilers & demo software?
The eZ430-RF2500 is a complete wireless development tool for the MSP430 and CC2500 that includes all the hardware and software required to develop an entire wireless project with the MSP430 in a convenient USB stick.
**broken link removed**


I believe the support software is here:
**broken link removed**
Works for Code Composer & IAR.

And you can download IAR & CCE from here:
**broken link removed**

 

[hcet]

ti ez430-rf2500 help led blinking

Please ask them for me thank you very much!

I printed it out but left it on my desk, honestly sorry

ep20k

 

[mobile-it]

how to print to console in ez430

Doesn't the EZ430-RF2500 kit come with compilers & demo software?
The eZ430-RF2500 is a complete wireless development tool for the MSP430 and CC2500 that includes all the hardware and software required to develop an entire wireless project with the MSP430 in a convenient USB stick.
**broken link removed**


I believe the support software is here:
**broken link removed**
Works for Code Composer & IAR.

And you can download IAR & CCE from here:
**broken link removed**

Correct it comes with this software but I want to use mspgcc compiler for programming it.

 

[hcet]

ez430-rf2500 code

@ mobile-it

All I read on the Internet, it seems mspgcc-20070216 is buggy.

I got the kit yesterday and I will give it a try with Code Composer Essentials v3 - Free 16KB IDE https://focus.ti.com/docs/toolsw/folders/print/msp-cce430.html
It's brand new (29 Apr 2008)

ep20k

 

[mobile-it]

+mspgcc ti ez430 usb

Hi

thanks for your help.

I just installed codecomposer on my pc (v3.0) and it works very good. I have a blinking led now thanks for the support!


now I am going to work me into this RF solution!

 

[mallappat2011]

Re: programming the ez430-rf2500

Hi Friend,

Here is the code for as your requirment..

#include <msp430.h>

int main(void) {
WDTCTL = WDTPW + WDTHOLD; // Stop watchdog timer
P1DIR |= BIT0; // Set P1.0 to output direction
P1DIR |= BIT1; // Set P1.1 to output direction
for(; {
volatile unsigned int i; // volatile to prevent optimization

P1OUT ^= BIT0; // Toggle P1.0 using exclusive-OR
P1OUT ^= BIT1; // Toggle P1.1 using exclusive-OR
i = 10000; // SW Delay
do i--;
while(i != 0);
}
}

ok I have got it up and running
can anyone give me an example (C program) that blinks the red and green led on the eZ430-RF2500 as a startpoint for me to learn?

thanks very much!