asicengineer1
Member level 2
- Joined
- Jan 16, 2007
- Messages
- 47
- Helped
- 4
- Reputation
- 8
- Reaction score
- 2
- Trophy points
- 1,288
- Activity points
- 1,596
Hi all,
I'm facing a problem w.r.t reset in my design, or rather, the lack of it. some sections of RTL, which are synchronous sequential blocks, don't have any reset at all and solidify reports these as errors.
Although this doesn't affect my design in anyway, since the regression passes with all possible combinations with the reset, they are still errors. I don't know the correct RTL methodology or by adding some constraints in the tool, with which i can overcome these errors.
Can somebody help me out with this problem?
Thanks !!
I'm facing a problem w.r.t reset in my design, or rather, the lack of it. some sections of RTL, which are synchronous sequential blocks, don't have any reset at all and solidify reports these as errors.
Although this doesn't affect my design in anyway, since the regression passes with all possible combinations with the reset, they are still errors. I don't know the correct RTL methodology or by adding some constraints in the tool, with which i can overcome these errors.
Can somebody help me out with this problem?
Thanks !!