Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Problem with 160 GB hard disk on Debian

Status
Not open for further replies.

tapa

Super Member
Full Member level 2
Joined
Feb 17, 2002
Messages
133
Helped
8
Reputation
16
Reaction score
5
Trophy points
1,298
Location
spain
Activity points
1,096
Hello,

I have updated my hardware to a 160G HD. And my debian is nos able to read hole disk. The partition table is:
primary hda1 hda2 hda3
extended hda5 hda6 hda7 hda8

But hda8 is loosed and fdisk fails to read partition table, and disk.

must I use some boot option, other kernel??

Now, I dont have my FAT32 partition to share files with windows :-(

thanks for all


TaPa
 

Re: big disk problem

try to use knoppix
ADM
 

Re: big disk problem

what kernel are u using right now?

what debian distribution do you have (version/flavor (stable, testing, unstable))?

Ciao
AxeL
 

big disk problem

does your motherboard accept disk bigger than 128GB ???
 

Re: big disk problem

Hello,

Thank all you. I solve it. The problem was kernel. It reads a wrong geometry from the HD.

I had instaled kernel-image-2.4.18-1-k7 from woody (debian) and I have change to 2.4.30 compiled by myself.

Of course my motherboard accept disk bigger than 128GB, and my windows also, and "systen rescue CD" (that use a 2.4.27 kernel) and now my debian with new 2.4.30 kernel.

by the way the HD was a ST3160021A


See you

TaPa
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top