msdarvishi
Full Member level 4
- Joined
- Jul 30, 2013
- Messages
- 230
- Helped
- 1
- Reputation
- 2
- Reaction score
- 1
- Trophy points
- 18
- Activity points
- 2,349
Hi friends,
I have a problem using the components available in artisan library in Cadence, when I put one inverter (INVX1) in the schematic and try to perform a simulation, he following error appears by Spectre. Anybody could help me, please?
ERROR: Netlister: unable to descend into any of the views defined in the view list: "spectre cmos_sch cmos.sch schematic veriloga ahdl" for instance I293 in cell RC_wire_Ring_OSC.
Either add one of these views to: Library: artisan_sc_30 Cell: INVX1 or modify the view list to contain an existing view.
I have a problem using the components available in artisan library in Cadence, when I put one inverter (INVX1) in the schematic and try to perform a simulation, he following error appears by Spectre. Anybody could help me, please?
ERROR: Netlister: unable to descend into any of the views defined in the view list: "spectre cmos_sch cmos.sch schematic veriloga ahdl" for instance I293 in cell RC_wire_Ring_OSC.
Either add one of these views to: Library: artisan_sc_30 Cell: INVX1 or modify the view list to contain an existing view.