LT1248 and LT1249 are similar architecture except the number of pins.
Generally, R01 should be improvisation of R00, in this case the converter part count will reduce in LT1249 than LT1248(Number of pins will decide the overall part count).
According to LT1249 data sheet (page 10) External clamp circuit (fig -6) only applicable when VCC pin is powered from some external housekeeping supply. This scenario applicable to LT1248 also
If VCC powered from the same line, the thermistor will take care of these surge. Thermistor can be placed before the bridge or after the bridge