problem in USB to serial converter with isolation

Status
Not open for further replies.
P

PRIYADHARSHINI PALANISAMY

Member level 2
Joined
Dec 23, 2013
Messages
52
Helped
2
Reputation
4
Reaction score
2
Trophy points
8
Visit site
Activity points
371
i m using usb to RS-232/485 to acquiring the Data..when i connect the converter to the PC
it indicate the port number in Device manager.but when i am trying to connect it through moDbus poll it inDicates that "port not available".what is the reason for this issue?:?:
 
Last edited:

Hi,

Look in the device manager if there is a "microsoft ballpoint mouse" is installed.

Sometimes i have problems with that. An FTDI chip is recognized and it shows the correct com port, but immediately the wrong mouse driver catches the port or the data.

The solution is to disable the ballpoint mouse driver in device manager.

Hope this helps

Klaus
 

yes.i used the converter in hyperterminal anD VB.In hyperterminal i DiD nt face any problem.In VB sometimes it shows "port not available".some times it works properly
 

Status
Not open for further replies.

Similar threads

Menu
Log in
Register
Cookies are required to use this site. You must accept them to continue using the site. Learn more…