Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

[SOLVED] Problem in this montage ''Programmateur de PIC sur le port USB'' Help me.

Status
Not open for further replies.
L

lolo2013

Newbie level 4
Newbie level 4
Joined
Mar 21, 2013
Messages
6
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Activity points
1,352
This montage

https://www.technologuepro.com/montages-electroniques/programmateur-PIC-USB-6.html

I used ''WinPic800_3.55G''

And when you press one of these buttons These are the messages that you not them get

detect pic:

PIC detected -> UNKNOWN


read all:


PIC detected -> UNKNOWN
Reading Code ...: 1024 word
Reading ID .....: 4 word
Reading Config. : 1 word
Reading Data ...: 64 byte

verify all:

PIC detected -> UNKNOWN
Reading Code ...: 1024 word
Reading ID .....: 4 word
Reading Config. : 1 word
Reading Data ...: 64 byte
Code ...: Ok
ID .....: Ok
Config. : Ok
Data ...: Ok


erase all:

PIC detected -> UNKNOWN
PIC is Erased .: Ok

program all:

error-> writing address 0x000000
written: 0x2EAC read: 0x3FFF



I want programming ''pic 16f877a''
 
Last edited by a moderator:

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top