problem in simulation with cadence Spectre

[kevinlin]

When I run the simulation , several errors were found like this:
"input.scs" 32 : function 'pPar' is undefined or is used recursively

Cadence IC version is 5033 in my notebook ,in our lab it's the same ,but it run quite well,how can i do?Is there any Configuration problems?

please help me , I have tried many ways but failed thank you!

 

[vick]

Most likely you have some problems with the technology files. Try to give more details about your problem...

 

[Fom]

This problem has no relation to technology file.
Do you use pPar() in your design?
Check line 32 in your input.scs file. May it will give you a hint.

 

[Hughes]

Please check the netlist to see which parameter use pPar() function. If you use AEL to set the model or m parameter, most likely you will get errors.

 

[kevinlin]

I have reinstalled the cadense soft,and the problem disappeard!

to:vick

I just do a analog simulation,is there any relation to tech file?I didn't use use a tech file in the design.

I have checked the netlist after problem occured,pPar function is in the netlist , but it should be replace by the parameter value in the same instance Amplifier.

pPar function didn't take effect!

thanks everybody!Do we have a good solution instead of reinstalling?