arjunbabu123
Newbie level 1
I doing a project in tunnel fets using silvaco atlas tool, my problem is, I am using non local band to band tunneling model for simulating NTFET, but by using this model, i couldn't get the any plot regarding this, always noise type signals came, is there any problem with the qtx mesh which i have written?
Here am sending my source code, plz reply me as early as possible......
Here am sending my source code, plz reply me as early as possible......
Code:
go atlas
mesh space.mult=8
x.mesh loc=0.00 spac=0.001
x.mesh loc=0.08 spac=0.001
x.mesh loc=0.100 spac=0.0002
x.mesh loc=0.125 spac=0.0002
x.mesh loc=0.135 spac=0.0002
x.mesh loc=0.150 spac=0.0002
x.mesh loc=0.152 spac=0.002
x.mesh loc=0.160 spac=0.002
x.mesh loc=0.250 spac=0.001
y.mesh loc=0.00 spac=0.0001
y.mesh loc=0.009 spac=0.0001
y.mesh loc=0.010 spac=0.0001
y.mesh loc=0.020 spac=0.002
y.mesh loc=0.021 spac=0.0001
y.mesh loc=0.025 spac=0.0002
y.mesh loc=0.030 spac=0.001
#
region num=1 x.min=0.1 x.max=0.15 y.min=0 y.max=0.009 material=Poly
region num=2 x.min=0.1 x.max=0.15 y.min=0.009 y.max=0.01 material=SiO2
region num=3 x.min=0 x.max=0.1 y.min=0.01 y.max=0.02 material=Silicon
region num=4 x.min=0.1 x.max=0.15 y.min=0.01 y.max=0.02 material=Silicon
region num=5 x.min=0.15 x.max=0.25 y.min=0.01 y.max=0.02 material=Silicon
region num=6 x.min=0.1 x.max=0.15 y.min=0.02 y.max=0.021 material=SiO2
region num=7 x.min=0.1 x.max=0.15 y.min=0.021 y.max=0.03 material=Poly
region num=8 x.min=0 x.max=0.1 y.min=0 y.max=0.01 material=Air
region num=9 x.min=0.15 x.max=0.25 y.min=0 y.max=0.01 material=Air
region num=10 x.min=0 x.max=0.1 y.min=0.02 y.max=0.03 material=Air
region num=11 x.min=0.15 x.max=0.25 y.min=0.02 y.max=0.03 material=Air
#
electrode name=fgate x.min=0.1 x.max=0.15 y.min=0 y.max=0
electrode name=bgate x.min=0.1 x.max=0.15 y.min=0.03 y.max=0.03
electrode name=source x.min=0 x.max=0 y.min=0.010 y.max=0.020
electrode name=drain x.min=0.250 x.max=0.250 y.min=0.010 y.max=0.020
#
doping gaussian characteristic=0.2 conc=9e19 p.type region=3 x.min=0 x.max=0.1 y.min=0.01 y.max=0.02
doping gaussian characteristic=0.2 conc=1e17 n.type region=4 x.min=0.1 x.max=0.15 y.min=0.01 y.max=0.02
doping gaussian characteristic=0.2 conc=9e18 n.type region=5 x.min=0.15 x.max=0.25 y.min=0.01 y.max=0.02
qtx.mesh loc=0.09 spac=0.001
qtx.mesh loc=0.11 spac=0.001
qty.mesh loc=0.009 spac=0.1
qty.mesh loc=0.010 spac=0.01
qty.mesh loc=0.025 spac=0.1
contact name=fgate workfunction=4.17
contact name=bgate neutral
models srh fermi print temperature=300 bbt.forward bbt.nonlocal bbt.nlderivs bgn
method newton
output con.band val.band eigen=7
solve init
solve vfgate=0.8
solve vfgate=0.9
solve vfgate=1.05
log outf=idvds01.log
solve vdrain=0.0 vstep=0.1 vfinal=1.6 name=drain
save outf=n1tfet.str
tonyplot idvds01.log
tonyplot n1tfet.str
quit
Last edited by a moderator: