[SOLVED] problem in samsung crt tv

pradeep.g.belchada · Oct 14, 2013

hello, i have a problem in samsung crt tv

tv starts picture comes for 10 minutes , suudenly tv h synch loss appears, some tee sound ( like buzzer) comes from fbt . tv stops i mean
h-o/p stops. i changed fbt, o/p transistor, damper cap then also the same problem. tv model samsung plano 21 , ic used tda 9381

schematic below

kabeer02 · Oct 15, 2013

change the line transformer then..

pradeep.g.belchada · Oct 15, 2013

i mentioned in the above post that line transformer (fbt) is replaced , yoke also replaced then also tv shuts down , when i remove yoke conector , h- section works

kabeer02 · Oct 16, 2013

How many volt did you see at the horizontal drive?

pradeep.g.belchada · Oct 16, 2013

normal 125v, but when ringing sound comes from eht voltage increses to 137v

nnaveli · Oct 31, 2013

i had that prob with plano and sansui sets mostly that fault attacks flat screens,i am not sure which coil is exactly affected but i think is the horizontal ,just change the Scan Coils.

[SOLVED] problem in samsung crt tv

pradeep.g.belchada

Full Member level 6

Attachments

kabeer02

Full Member level 5

Sakthivel79

pradeep.g.belchada

Full Member level 6

kabeer02

Full Member level 5

pradeep.g.belchada

Full Member level 6

nnaveli

Member level 2

Sakthivel79

Similar threads

[SOLVED] problem in samsung crt tv

Full Member level 6

Attachments

Full Member level 5

Full Member level 6

Full Member level 5

Full Member level 6

Member level 2

Similar threads

Privacy & Transparency

Privacy & Transparency