Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

[SOLVED] Problem in opening the output window in MPLAB X IDE v3.61

Status
Not open for further replies.
D

deepshah3

Junior Member level 1
Junior Member level 1
Joined
Jan 30, 2018
Messages
17
Helped
0
Reputation
0
Reaction score
0
Trophy points
1
Activity points
161
I am using MPLAB X IDE v3.61.

I closed the project output window by mistake,after building a project.
Now,I am not able to open the output window.I tried to open it by going to Windows>Output.

I also tried to open it by its shortcut key Ctrl+4.
However,none of that is working.Is there anything else that I can do?Please let me know..
 

Yes there is a very good feature goto window and press Reset windows in Mplabx. Everything will be as original.
 
Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top